Quick Details

  • Standard: JIS, JIS G3463-2006, JIS G3459-2004, JIS G3461-2005, JIS G3454-2007, JIS G3455-2005, JIS G3462-2004, JIS G3452-2004, JIS G3458-2005, JIS G3445-2006, JIS G3444-2006, JIS G3456-2004, JIS G3468-2004, JIS G3446-2004, JIS G3460-2006, JIS G3457-2005
  • Thickness: 1 - 50 mm
  • Section Shape: pipe
  • Place of Origin: Japan
  • Secondary Or Not: Non-secondary
  • Application: Structure Pipe, Structural Steel Bar
  • Technique: Hot Rolled
  • Alloy Or Not: Non-alloy
  • Model Number: str-34
  • Brand Name: Sanyo Specialty Steel
  • Special Use: Free Cutting Steel
  • Type: Carbon Steel Bar

Packaging & Delivery

Packaging Details: Packaging for export (however, packaging is omitted or simple packaging is provided in the case of a single container)
Delivery Detail: One month after payment confirmation


We respond to requirements for a wide range of materials
including steel for tools, stainless steel, and even aluminum.


cold drawn steel bar ss400 s45c round bar

square flatbar hexagon


Please rely on us for any kind of specialist steel.
We mainly offer structural steel, but can offer any other types including tool steel,stainless steel

and even aluminium.We can respond to requests for a wide range of materials.
Please rely on us for quick delivery with short lead times.
We understand well that delivery delays lead to major losses in missed opportunities and lost profits.

We will always endeavor to realize the shortest possible delivery times and to deliver at the time you require.
Please rely on us for high precision processing.
We have a selection of processing machinery, including high precision cutting machines,

and will deliver to you after processing into your required shapes and lengths. 

Structural Steel


Specializing in supplying products with Japan standard


A number  represents the amount of carbon( for example S45C means 0.45% carbon).

It is used mechanical parts and others.


Chrome and molybdenum added carbon steel. There is easy to heat treatment.

Excellent heat resistance and hardness at high temperatures can be maintained.

The amount of molybdenum added 0.15 to 0.3%.


Nickel and chrome  added  carbon  steel.

Excellent hardenability.

High toughness material by anneal.

Nickel  amount is range from 1 to 3.5%.


Chrome nickel and molybdenum added carbon steel.

It is very expensive toughness steel.

For example SNCM630(added 2.5-3.5%Nickel 2.5-3.5%Chrome.0.5-0.7%  Molybdenum).

The tensile strength is over 1080N/mm²,yield point is over 885N/mm² and the hardness is HBS302-352. )


JIS: SS400, S45C, SCM415, SCM435, M23L1, 12L14, S45CF, SCM415F, SCM435F.

Specializing in supplying products with Japan standard


Cold-finished steel bar of SS400.

Tensile strength of SS400 is 400-510 N/mm².


Cold-finished steel bar of S45C.

Chemical composition of S45C is follows



Cold-finished steel bar of SCM415.




Cold-finished steel bar of SCM435.

Chemical composition of SCM435 is follows




Steel is made with the addition of sulfur in order to improve the machinability of cold-finished carbon steels,SUM23L(JIS).


Steel is made with the addition of sulfur in order to improve the machinability of cold-finished carbon steels,SUM24L(JIS).


This cold-finished steel are added lead to S45C.


This cold-finished steel are added lead to SCM415.


This cold-finished steel are added lead to SCM435.



JIS: SGP, OST, STKM,SUS and others.

Specializing in supplying products with Japan standard 


Carbon steel pipe for plumbing.


Presition carbon steel pipe for hydaulic plumbing


Carbon  steel for mechanical structures.


Pipe with material stainless steel.


Tool Steel


Specializing in supplying products with Japan standard

tool steel, which provides excellent impact resistance, wear resistance,

fatigue strength, and high temperature strength, is used for dies and tools.


SK has properties similar to SC.

The carbon content of 0.6 to 1.5%, hardness is not much different hardening, impact resistance. 

SK is among the less expensive tool steel and very popular steels.

SK is at high temperatures tend to soften unlike any other tool steel, for use in this environment is not well suited.


SKS3 is alloy tool steel for mold of cold,and SKS3 is less deformation after hardening.

It has added a special element tungsten.

SK tool steel material compared to the same carbon content but not

with SK variants are less than half the deformation of the material.

It will be used for gauge and blade chassis.


SKD11 steel is particularly good wear resistance of alloy tool steel at room temperature for a cold mold.

Known high hardness can be obtained by nitriding.

High chromium, high carbon steel will be used to gauge the type and press.


SKD61 is the type of steel used in hot.

There is hardly characteristic thermal cracking.

It is used for hot dice, hot cutting blade, die-casting dies.


Steel for tools for machining.  There are two types of molybdenum and tungsten series.

The process becomes more highly abrasion-resistant steels can be difficult.


Untempered Steel


Specializing in supplying SMnV45TL products with Japan standard - JIS

SMNV45TL is Sanyo special steel brand.


1.  Low oxygen and high clean steel with vacuum degassing.

2. This steel contains a lot of silicon and manganese other than normal steel.

And adds vanadium and lead. Charpy impact values are good. Mass effect is small, so large parts can be used.

3.  SMNV45TL is constant cross section hardness more than quenching  S45C(JIS).

4.  Organization of quenching carbon steel is sorbite. But organization of SMNV45TL is ferrite and pearlite.

So easy-cutting and mass effect is good.

It is more easy-cutting because adding lead. It is constant cross section.So machinability is stable.

5. Proof stress and elongation of SMNV45TL are slightly inferior more than S45C (JIS).

Tensile strength of SMNV45TL is higher than S45C(JIS).

6. You can eliminate thermal distortion of quenching S45C (JIS), because hardness can be obtained only from the air cooling after rolling.

7. Hardness is HRC 23-28.


Specializing in supplying SCM415NR products with Japan standard - JIS.

SCM415NR is Sanyo special steel brand.

SCM415NR can be omitted normalizing(compared to SCM415 JIS).

Process can be omitted,so it will reduce cost.

Stainless Steel

JIS: 303, 304, 403, 310, 420J2, 416  and others.

Specializing in supplying products with Japan standard

Stainless steel and heat resistant steel are characterized by high corrosion resistance,

acid resistance, oxidation resistance, and heat resistance.


It is 18Cr-8Ni and high sulfur stainless steel.

It is used bolt and nut.

SUS303 is easy to cut than SUS304, but less corrosion resistance


SUS304 is one of the most popular type of steel. It is a heat-resistant steel.

Corrosion resistance and weldability, is known for its good mechanical properties.


SUS403 ‘s component is 13Cr and low  silicon.

It is high stress and heat-resistant steel parts for turbine blades


SUS310S is correct.

SUS310S’s component is 25Cr-20Ni.

And oxidation resistance is better than SUS309S.

It is often used as heat-resistant steel.


It is stainless steel with high hardness after hardening.

Blades and nozzles, valve seat and valve is used.


The best grades of stainless steel machinability.

About us 
Company Established: April 1962

President’s Greetings

Our role can be summarized by the phrase "To meet our customers’ requests".
To process the requested material into the requested shape and deliver at the requested time.
Therefore we work with any material and do not even limit ourselves to specialist steel.
First, let us know what your requests are.From there, all the work is ours.

About our overseas tie-up businesses

Contract Vending and Processing from Materials to Processing


Address: Lot C,Road2,Dong An Industrial Park,Thuan An Dist,Binh Duond Province,VIETNAM
(40 minutes by car from Ho Chi Minh Central area, 35 minutes by car from Tan Son Nhat International Airport)


6 Vertical milling machines

(capable of processing up to X1100mm,Y500mm,Z500mm)
1 CNC lathe (capable of processing up to 250 diameter x 1000mm)
1 Gun drill (capable of processing from 8mm up to 36mm diameter)
1 Radial
1 Boring machine
1 Welding robot
1 Mill (capable of processing up to 400 diameter)


TEL +84-6506-280-022
FAX +84-6506-280-023

In partnership with a local cast metal manufacturing company

Comprehensive manufacture from materials to processing is possible thanks to our stock of materials

(SS400, SC, SCM etc.). Reliable quality and delivery for Japanese companies.


Noiluc is a company specializing in trading about industrial equipments.

We are one of the leading companies supplying products of steel, special steel, pipe fittings, pipe coupling,

hi tanks, doors instruments, equipments etc., used for maintaining of factory and project

in multiple industrial applications, such as oil, gas, chemical, steel mill, cement, security, etc.
Being a famous manufacturer, we are proud of providing high quality products with the best prices and reliable service.


We are confident that we can meet your various demands for industrial equipment.

We are sincerely looking forward to the chance of servicing our clients in shortest time with our best service.

Address: 138 Nguyen Sy Sach, 15 ward, Tan Binh Dist.,HCM City Viet Nam

Phone : (84-8)3 8143220
Fax : (84-8)3 8143219
Web : http://www.thietbicongnghieponline.com

The scene on site

Abundant Stock

State-of-the-art mills (various types depending on use)
Use of a unique system to make processes efficient, from order receipt to delivery

introduction to facilities

Various types of milling machines enable milling that is suitable for purpose

1. Compatible with continuous cutting (top left)
2. State-of-the-art CNC mill – enables continuous milling of a range of types (top right)
3. Cuts up to 500mm with perpendicular lowering (bottom left)
4. Fast, high precision milling of small diameters (down to 100mm)


Exhibited at one of the largest general engineering machinery

sample markets , MTA VIETNAM for two years running in 2010 and 2011. 

The total number of exhibiting companies was 320,the number of visitors was 8,000 in four days.


Exhibited at the Shanghai Manufacturing Business Meeting

held on September 12-13, 2012.

The Shanghai Manufacturing Business Meeting is an exhibition where Japanese manufacturing companies

who wish to enter the Chinese market, gather together. It is an international business meeting where

Japanese manufacturing companies exhibit their own products and enter into business negotiations with

local Chinese businesses and China-based Japanese businesses in order to expand their market in China.

The number of exhibiting companies was 580, and the number of visitors was approximately 10,000.

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview


Transaction Details

This supplier has completedtransactions with buyers from .

Buyer’s Country
Transaction Value
Transaction Date
Email to this supplier